Profile

1-Phase & 3-Ph Balanced Portable Energy & Harmonics Analyser

Measurements:

• Voltage, current, power, energy and power quality measurements in a handy instrument
• Large Colour LCD screen for graphical menu-driven display
• Continuous cycle by cycle measurement of both current and voltage @ 256 samples/cycle – for accurate and dependable measurements even on non-linear loads
• Suitable for 1-Phase & balanced 3-Phase loads
• Wide choice of clamp-on CTs to measure currents from 100mA to 3000A - Options include 5/100A CT; 1000A CT; 3000A Ampflex CT; 1000Aac/1400Adc CT
• Motor inrush current recording

1-Phase Portable Energy & Harmonics Analyser

Measurements:

• Voltage, current, power, energy and power quality measurements in a handy instrument
• Large backlit LCD screen for graphical menu-driven display
• Continuous cycle by cycle measurement of both current and voltage @ 256 samples/cycle – for accurate and dependable measurements even on non-linear loads
• Suitable for 1-Phase & balanced 3-Phase loads
• Wide choice of clamp-on CTs to measure currents from 5mA to 6500A - Options include 5/100A CT; 1000A CT; 6500A Ampflex CT; 1000Aac/1400Adc CT
• Motor inrush current recording

The Fluke 41B Harmonics Analyzer combines the ease of use of a digital multimeter, the visual feedback of an oscilloscope and the power of a harmonics analyzer in a single instrument

Three Views of each reading:

• Waveform
• Bar graph showing harmonic levels
• Numeric values

Real-time Display Updates:

• Display updates three times a second for a dynamic view of actual circuit conditions.

Comprehensive Measurements:

• Measure rms, peak and total harmonic distortion (THD) for complex voltages and currents - with no manual calculations required.

It  is a portable transit-time ultrasonic flow meter with clamp-on transducers for non-invasive liquid measurement. Based on microprocessor, field programmable flow measurement technique allows no interruption to the process flow and has low installation costs.

"Small robust Single-Gas Analyzer using electrochemical sensors.
"

Thermal imaging is the use of cameras constructed with specialty sensors that “see” thermal energy emitted from an object. Thermal, or infrared energy, is light that is not visible to the human eye because its wavelength is too long to be detected. It’s the part of the electromagnetic spectrum that we perceive as heat. Infrared allows us to see what our eyes can not.

"

• Does not require breaking down grounding wire and need no auxiliary electrode
• Long Jaw size: 65 X 32 mmØ - The unique long Jaw is particularly suitable where grounding is done by flat steel or copper strips
• Resistance measurement range: 0.01 Ohm to 1200 Ohm
• AC Leakage Current measurement range: 0 to 20 A
• RS 232 interface for monitoring, uploading , analyzing and printing of data
• Memory storage capability of 99 records

"

Light meter, analog output. Separate LIGHT SENSOR allows user take measurements of an optimum position.

The Raytek Mini Temp Non-Contact Thermometer Gun with Laser Sighting has a temperature range of 0 to 750 degrees F (-18 to 400 Degrees C), a backlit display, laser targeting distance-to-spot: 8:1, selectable degrees C or F.

This meter allows us to measure the acidity or alkalinity of liquids. Anticipate mistakes and work with complete control of the process, helps you achieve highly accurate results. The meter automatically compensates pH measurement in real time.

Highly efficient and accurate due to its advanced microprocessor technology.

The Dry Bulb, Wet Bulb temperatures are important to determine the state of humid air. The knowledge of only two of these values is enough to determine the state - including the content of water vapor and the sensible and latent energy (enthalpy).